There are many reasons for the belt deviation of the scraper conveyor, but in the final analysis, these are the following reasons. Troubleshooting the cause of deviation can be started from these aspects.
(1) Firstly, check whether the scraper conveyor is caused by errors during production and installation. In the production process of scraper conveyor, there are mainly problems such as non-standard belts manufactured by the manufacturer and inadequate handling of belt joints, which directly lead to uneven stress on both ends of the belt. The installation was not carried out in accordance with the specifications, and the rack installation tilted, resulting in belt deviation.
(2) Secondly, check whether it is a problem during the operation of the scraper conveyor. The blanking point is not kept in the center of the scraper conveyor belt, resulting in belt deviation due to uneven force on both sides.
(3) Check again if it is the problem with the scraper conveyor belt itself. If the scraper conveyor runs for a long time, the belt will definitely have wear, deformation, and aging, resulting in belt deviation. The belt should be replaced at this time.
(4) Finally, check for foreign matter interference. The roller and idler are the main transmission components that ensure the operation of the scraper conveyor belt. The belt bulges when there are foreign objects on the drum and idler, which is also one of the main reasons for the belt deviation of the scraper conveyor.
