Installation and commissioning
1. Check whether the installation foundation meets the Scraper Conveyor design requirements;
2. Check the structure and size before installation;
3. Pay attention to the fastening of each connection point during installation, which can be adjusted;
4. After the Scraper Conveyor installation is completed, static balance test should be carried out to determine the stability of the installation.
Appearance inspection
1. Check whether the Coal Conveyor appearance of the scraper conveyor is intact, with or without damage, wear, deformation and other phenomena;
2. Check whether the protective periphery is intact, with or without rust, deformation and otherhttp://www.conveyorintl.com/product problems;
3. Check whether the Coal Mining Scraper Conveyor electrical equipment is well grounded, whether the wiring is correct, and whether the cable has insulation damage.
Test run
1. The motor must be no-loaded before the test run for low-speed test run;Performance check
1. Check whether the Coal Mining Scraper Conveyor transmission part, driving device and tensioning mechanism of scraper conveyor are normal;Quality control
1. Conduct a comprehensive inspection of the scraper conveyor to confirm whether the indicators meet the standards;3. To promote the quality control of the factory and establish quality files.
Conclusion
In a word, the acceptance standard of Scraper Conveyor in appearance inspection, installation and commissioning, test run, performance inspection and quality control Coal Mining Scraper Conveyor must comply with the relevant specifications to ensure the stability and reliability of product quality and performance.
