Wear and tear of Coal Mining Scraper Conveyor is an important factor affecting operational efficiency and safety.
In order to reduce the wear and tear, the following methods are controlled in the process of use:
1. Regular inspection and maintenance.
Chain: Regularly check whether the chain is loose, bent or damaged, and replace the worn parts in time.
Conveyor Belt Scraper: Observe whether the Conveyor Belt Scraper is worn or broken, and replace it in time.
Reel: Check whether the bearing of the reel is good, whether the lubrication is sufficient, and replace the worn parts in time.
Roller: Clean the roller regularly, make sure the surface of the roller is smooth, and replace the worn roller bushings.
Protective cover: Make sure the protective cover is in good condition to prevent the material from leaking out and reduce the impact on the chain and scraper.
2. Correct operation:
Reasonable load: Avoid overloading, avoid excessive tension on the chain and Conveyor Belt Scraper, and reduce friction and wear.
Smooth start-up: check whether all parts work properly before start-up, avoid rapid start-up and reduce start-up impact.
Speed control: Avoid high speed operation to reduce wear and tear.
3. Optimise the environment.
Lubrication: Use high-quality lubricant and supplement lubrication regularly to reduce friction.
Temperature control: too high or too low temperature will affect the performance of chain and scraper, should maintain the appropriate temperature.
Dustproof: Equipped with good dustproof device to reduce the corrosion and abrasion of dust on the equipment.
4. Upgrading.
Use of wear-resistant materials: Use high-strength wear-resistant materials to manufacture chains, scrapers and other parts to prolong the service life.
Optimise structural design: Optimise the structure of the equipment to reduce the contact area between parts and reduce wear and tear.
5. Regular replacement of wearing parts.
Regularly replace the worn chain, scraper, drum bushing and other wear parts, eliminate hidden danger in time, ensure the safe and efficient operation of the equipment.
Through the above measures, we can effectively reduce the wear and tear of Coal Mining Scraper Conveyor, prolong the service life of the equipment, and reduce the operation.
