Nowadays, some new types of equipment have appeared in the coal industry, such as coal mining scraper conveyor. The appearance of this kind of equipment has brought a lot of convenience to coal mining, which not only improves operation efficiency, but also reduces coal mining costs. But we also see that some people do not understand the operation and use of the coal mining scraper conveyor. So, what issues should be paid attention to?
Through communication with industry professionals, we found that the following issues should be paid attention to in the use of coal mining scraper conveyor. First of all, when installing the equipment, the manufacturer’s technicians must be invited to the scene. And under the guidance of technicians, complete the installation and debugging of the equipment until there is no abnormality after repeated debugging. Secondly, we must be familiar with the operation process of the equipment. Before operation, it is necessary to understand the process and precautions, and qualified users can also invite equipment manufacturers and technicians to organize training and guidance to master the operation skills. Again, pay attention to the operating conditions of the equipment. On the one hand, it is necessary to be familiar with the technical parameters of the equipment. If any abnormality in the parameters or equipment failure is found, the operation should be stopped. On the other hand, the key parts of the equipment, such as chains, control devices, etc., should be checked before operation. Only the key parts remain normal before the next operation can be performed. After each operation, the impurities or foreign objects attached to the equipment should be cleaned up in time to keep the equipment in a relatively clean state.
Of course, there are still many problems that need to be paid attention to in the use of the coal mining scraper conveyor, such as regular inspection and maintenance of the equipment, so that the equipment can be in good technical condition. At the same time, it should be used in accordance with the standard load of the equipment and should not be overloaded, which will easily cause damage to the equipment and shorten the service life of the equipment, which affects both the operating efficiency and the economy.
