The chain scraper conveyor is equipped with a broken chain alarm device, which can detect broken chain and broken chain in time, automatically stop and send out an alarm signal. In addition to the unique backpack drive mechanism, the chain scraper conveyor not only has good strength, saves space, but is also easy to install and maintain.
The movable sprocket of the scraper chain conveyor is usually a concave tooth type, which is more adaptable to household round chains than a convex tooth sprocket, which can ensure that the chain is not worn after the chain is severely worn, and the circumference is increased. This greatly extends the chain replacement cycle.
Corresponding chain tension adjustment adopts worm gear deceleration and self-locking tensioning mechanism, which is labor-saving and easy to operate, ensuring that both sides are tensioned at the same time. At the same time, the high-strength mining round chain of the scraper chain conveyor is used as the conveyor chain, which has a large load-bearing capacity and abrasion resistance. Due to the characteristics of the material flow, the return chain and the scraper are separated from the material, thereby avoiding a sudden increase in the feed volume. Increase and prevent chain scraper accidents caused by the machine room.
Not only that, but the overload protection device is also installed in the chain conveyor. When the chain is overloaded, it will automatically stop and give an alarm signal. In order to reduce the wear of the scraper and chain of the chain scraper conveyor, the basalt cast stone lining not only has a much longer life than the metal substrate, but also has a smaller frictional resistance than the metal substrate.
