1. Turn off the power supply of the conveyor belt scraper conveyor, remove the protective cover, loosen the assembly bolts of the motor, and move the motor to make the conveyor belt loose enough to remove it without prying it open. Do not pry off the conveyor belt!
2. Remove the old conveyor belt from the conveyor belt scraper conveyor and check for any abnormal wear. Excessive wear may indicate a problem in the design or maintenance of the transmission device.
3. Choose a suitable conveyor belt to replace the conveyor belt scraper conveyor.
4. To clean the conveyor belt and pulley, it is advisable to wipe the cloth with a small amount of non volatile liquid. Soaking in cleaning agents or using cleaning agents to brush the conveyor belt is not advisable; It is clearly not advisable to use sandpaper or sharp objects to remove oil and dirt. The conveyor belt must be kept dry before installation and use.
5. Check if there is abnormal wear on the conveyor belt pulley of the scraper conveyor and if it is symmetrical in a straight line. The linear symmetry of the belt pulley is crucial for the operation of the conveyor belt transmission device.
