1. The coal mining scraper conveyor should be started at no load to avoid forced start, so as not to damage the conveyor.
2. Before coal mining scraper conveyor is started, it must be thoroughly inspected in order to be able to check whether there are any problems, and all must be included. There must be no omission. A jog test can only be carried out after checking that there are no problems. After the test runs, there is no problem before you can officially drive.
3. In the event of a malfunction, stop immediately and follow the shutdown handling rules and regulations.
4. After coal mining scraper conveyor is stopped, a warning sign should be hung at the switch to be able to play a warning role.
5. The rotating part of the conveyor should be equipped with a protective fence or a protective cover. A guard plate should be installed at the tail of coal mining scraper conveyor. A pedestrian bridge should be set up to ensure its safe operation.
6. The coal mining scraper conveyor should be stopped under no-load conditions.
