The installation procedure of the coal mining scraper conveyor is briefly summarized. Before installation, the installation must be completed after the operation of the tower and the silo are completed. The installation and adjustment of the conveyor must be performed according to the geological parameters and drawings.
Scraper conveyor installation steps:
1. Draw a line, check the civil construction, check the anchor bolts and embedded steel plates, and check the position of each part of coal mining scraper conveyor.
2. Install the truss according to the anchor bolts, install and adjust the upper and lower supporting rollers, wipers, driving devices and equipment, install the belt hoist, and install the telescopic head.
3. Install the material guide slot, then install the tensioning device, and install all the electrical brackets
4.Finally tape cutting and vulcanization connection
At the end of installing coal mining scraper conveyor, repaint the damaged parts in accordance with the technical specifications, and then add grease or lubricant to the conveyor equipment (reducer, coupling Equipment, cranes, bearing blocks, motor bearings, etc.).
