Coal mining Scraper Conveyor are generally equipped with other equipment to assist in the completion of a material conveying process. When choosing a conveyor, you must choose those mechanical products that have a matching volume and mode with other equipment. Scraper conveyor has many advantages such as simple structure, small footprint, and no flying material during transportation.
During the storage of the coal mining scraper conveyor, the product must be placed in rolls, not folded, and the conveyor belt should be turned once a quarter. Conveyor belts of different types and specifications should not be connected together, and the joints should preferably be glued together. The material density of the conveyor and the viscosity of the material are based on the needs of the user. Machinery manufacturers cannot change the nature of the material. They can only adjust the width and height of the trough during the design process according to their properties, and then choose the appropriate Motor.
The conveyor belt of the coal mining scraper conveyor has a high degree of blockiness, abrasion-resistant materials and a discharge device using a fixed pear should use as low a speed as possible. The relationship between the diameter of the driving roller of the roller conveyor belt and the layer of the conveyor belt, the matching of the driving roller, the redirecting roller, and the requirements for the groove angle of the supporting roller should be selected reasonably according to the design rules of the conveyor. Comply with the soft and moderate blanking plate to prevent the blanking plate from being too hard and scratching the belt surface of the conveyor belt.
