When using a crane to transport the chain scraper conveyor, the rope and steel rod are used to lift. First put a steel rod through the hole with the mandrel, and hang the rope with the brace bar at both ends of the steel rod to lift the strap.
When lifting the scraper chain conveyor, be careful not to damage the edges of the rope. In the absence of steel rods and braces, a fabric rope with sufficient strength can also be hoisted through the mandrel hole. But where the rope is in contact with the belt, an object should be placed to prevent the rope from strangling the edge of the belt. Do not insert the spreader into the belt roll and lift it. Do not wind the rope around the belt roll to prevent the belt roll from slipping to the side. It can also be lifted by a forklift with sufficient carrying capacity, but the outer ring of the belt must not be damaged.
