During the operation of the coal mining scraper conveyor, it is likely to be interrupted due to the interference of external factors, so we must always pay attention to the effective operation of the coal mining scraper conveyor. In order to achieve this goal, what effective measures need to be taken on the coal mining scraper conveyor?
First of all, it is necessary to keep the coal mining scraper conveyor running in a flat and straight condition as much as possible. The coal mining scraper conveyor is allowed to have corresponding bending in both horizontal and vertical directions. This is designed to adapt to the working surface and roadway transportation. It does not mean that any vertical and horizontal bending of the body is reasonable.
Once the coal mining scraper conveyor turns a "bend", the bending angle of the chute joint will be too large, resulting in excessive force on the chute joint and damage. After the chute connector is damaged or lost, the chute joint loses control. When the chute joint is bent, there is a gap between the chute joints, and the coal powder leaks to the bottom chute, which will increase the running resistance or cause a blockage accident. If the coal mining scraper conveyor is not evenly laid, the joints of the scraper and the chute at the overlap of the chute will wear out, increase the running resistance, shorten the service life, and even affect the work of other supporting equipment.
Secondly, it is necessary to improve the effective running time of the coal mining scraper conveyor. Under the corresponding load, the higher the working utilization rate of the equipment operation, the greater the conveying capacity. This is beneficial to the full utilization of the coal mining scraper conveyor and is to increase output And effective ways of economic benefits.
